#HAYWARD DE FILTER GRIDS PLUS#

Open the air bleeder and take out the drain plug.These are the steps to take to replace pool filter grids: Also replacing the grids all at once helps you to stay on track for grid replacement next time. If you’ve determined that it’s time to replace your grids, be sure to replace them all at once so that they are all working at the same capacity. Grids are discolored and not easily cleaned.Some other indicators that your grids are ready for replacement are: This shows up as a white or gray powdery substance on the bottom of the pool. Tears in the grids can cause the diatomaceous earth to flow back out into the pool water. DE filter grids can last for four or five years with proper care.ĭuring cleaning, the grids need to be looked over for damage. Those with a DE filter should be opening up their filter and cleaning the grids every three months or more often. Add the system type and any other desired system notes.Scanning is complete when you hear the chime and see a blue checkmark on your screen.When the device says “ready to scan”, place your device over the NFC FiLink chip on the end of the filter (scanning can take up to 15 seconds).Ensure NFC is enabled on your smart device.

#HAYWARD DE FILTER GRIDS PLUS#

Click the plus icon to add a new filter.

Once installation is complete, register your account.

To get started with FiLink, simply follow these steps:

Service professionals can easily track filter replacements with the FiLink app from FILBUR.

Before replacing the top, make sure that there is no debris around the edge to ensure a proper seal.įILBUR FiLink Simplifies Filter Replacement.

Make sure that the o-ring is in good condition.

Put the new cartridge in place, being sure to get it into the fitting at the bottom.

The steps for replacing your cartridge are quite simple: Once you have the right replacement cartridge, it’s time to get it installed so that you’re ready for another busy swim season.

Record whether or not the cartridge has a PVC core.

Be sure to also take down the OEM (original equipment manufacturer) and model number of the filter that your cartridges will be put into.

Make note of the type of end cap and, if one end is open, measure the diameter of the opening.

If you can measure through the center, that is optimal. When measuring the length, be sure to include the end caps.

Measure both the diameter and length of your cartridge (in inches).

Here are the steps to finding the right replacement cartridge for your pool : If your pool filter grids and cartridges are due for replacement, getting that task taken care of ahead of the busy swim season is ideal. Rips or cracks in either are a clear sign that the filter’s capabilities are compromised and replacement is in order. When you have the cartridge out for cleaning, be sure to inspect both the fabric and the end caps.

A pressure reading for your filter that is above the normal range (10-25 psi) that is occurring more frequently than usual.

Some indicators that your cartridge is in need of replacement are: When cartridges are cleaned the fibers become looser, which makes them less capable of trapping fine particles. Cleaning can only be done so many times before you will start to notice issues. Over time though, calcium, oils, sweat, dirt, leaves, body lotion and more build up in the filter. Pool filter grids and cartridges can and should be cleaned on a regular basis - usually every three months or more often. Heavy pool usage, however, will increase the need for new grids and cartridges. The volume of the pool versus the filter surface size can help you in determining the length of time your cartridges and grids will last. Typically, pool filter cartridges are made to last between 3 and 5 years with proper care. Doing so will help ensure you have clean, clear water to look forward to all swim season long. Spring is all about starting new, so it’s the perfect time to replace your pool filter grids and cartridges.

Hayward de filter grids